Overview
SC(B)10 Three Phase Epoxy-resin Insulation
Dry-type Transformer are excellent entproducts fornetwork transformation with high mechanical strength,dectric strength and heat-resistance,lt has filled with “F”Level Epoxy-resin and treated by vacuum, They are spe-cially suitable for high buildings,air-ports, substations andcommercial centers, and any other anti-fire,anti-explode,anti-moisture places etc.
Features
Flame retardant, explosion-proof and mainte-nance-free and no installatons are allowed and save your cost.
Economic due to low loss and good conservation of power.
Partial discharge is less than 10PC; high mechanical strength and reliability; moisture resistance and dust protection.
Anti-shortcircuit; good performance to withstand the lighting impulse.
The outer casing is made of iron and alumin alloy.There are different case tyes and modes of wiring at your choice.
The transformer can be equipped with temperature control & display system according to the specific requirement.lt can be cooperated with the temperature control system.
| Voltage level : | 10.35kV |
| Capacity range : | 30-3150kVA |
| Voltage regulation mode: | off-circuit tap-changer |
| Decomposition range : | ±2x2.5% or ±5% |
| Frequency : | 50Hz or 60Hz |
| Vector group: | Y, yno, D, yn11 |
| Short-circuit impedance: | standard impedance |
| Maximum temperature rise : | 100K |
| Cooling method : | AN or AF |
| Protection registration: | |
| indoor : | IP00, IP20 outdoor :IP23 |
| Insulation registration: | Class F |
| Insulation level : | 10kV power frequency withstand voltage 35/3kV impact voltage 75kV |
TDS
