1250KVA Compact Substation Transformer

QXG Transformer

Substation transformers are generally oil-immersed. Mineral oil, vegetable oil or siliceous transformer oil. Widely used in various utility or small industrial applications. Construction standards are generally IEEE, CSA standards. The primary voltage of transformers in substations is usually a minimum of 2.4 kV and a maximum of 69 kV, which is based on the IEEE standard. The minimum capacity is 150kVA to the maximum 20MVA, and the secondary voltage can also be a minimum voltage of 0.6KV and a maximum voltage rating of 35kV.

We can do

Certificate: UL

Phases: Single

Frequency: 50 Hz, 60Hz

Standard: IEEE, CSA, ANSI, DOE

Base rating: 250 kVA through 6667 KVA

High Voltage (Minimum): 1386V through 6900 V

High Voltage (Maximum): 46000V through 69000V

Low Voltage (Minimum): 120 V through 1386 V

Low Voltage (Maximum): 4160 V through 34500 V

Windings: Copper, Aluminum

We can do

Certificate: UL

Phases: Three

Frequency: 50 Hz, 60Hz

Standard: IEEE, CSA, ANSI, DOE

Base rating: 112.5 kVA through 10000 KVA

High Voltage (Minimum): 600V through 6900 V

High Voltage (Maximum): 34500V through 69000V

Low Voltage (Minimum): 120 V through 1386 V

Low Voltage (Maximum): 2400V through 34500 V

Windings: Copper, Aluminum

IEEE Test

First consider the resistance test, polarity test, phase relationship test, ratio test, no-load loss test, load loss test, and suitability temperature rise test, dielectric test. At the same time, in order to ensure the safety of the test and the damage to the transformer, the voltage part related to the current should be tested first.

In addition, the lightning test is not a mandatory test, especially under the condition of small capacity and voltage, a lightning test may cause catastrophic loss to the transformer, we can consider the sampling test under the conditions, there are low frequency tests, induced voltage tests, etc.